 |
C
|
Miscellaneous Alloys |
|
Alloy
Specification |
Carbon
Min - Max |
Mang
Min – Max |
Silicon
Min – Max |
Chrom.
Min - Max |
Nickel
Min - Max |
Moly.
Min - Max |
Phos.
Min - Max |
Sulfur
Min - Max |
Copper
Min - Max |
Iron |
Other |
Melting
Range ºF |
|
Mn Steel Alloys ASTM
A-128 GR A |
1.05-1.35 |
11.0Min. |
1.00 |
|
|
|
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR B1 |
.90-1.05 |
11.5-14.0 |
1.00 |
|
|
|
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR B2 |
1.05-1.2 |
11.5-14.0 |
1.00 |
|
|
|
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR B3 |
1.12-1.28 |
11.5-14.0 |
1.00 |
|
|
|
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR B4 |
1.2-1.35 |
11.5-14.0 |
1.00 |
|
|
|
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR C |
1.05-1.35 |
11.5-14.0 |
1.00 |
1.5-2.5 |
|
|
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR D |
.70-1.3 |
11.5-14.0 |
1.00 |
|
3.0-4.0 |
|
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR E1 |
.70-1.3 |
11.5-14.0 |
1.00 |
|
|
.9-1.2 |
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR E2 |
1.05-1.45 |
11.5-14.0 |
1.00 |
|
|
1.8-2.1 |
.07 |
|
|
Bal. |
|
2450-2550 |
|
ASTM A-128 GR F |
1.05-1.35 |
6.0-8.0 |
1.00 |
|
|
.9-1.2 |
.07 |
|
|
Bal. |
|
2450-2550 |
|
N-135 MIL-S-22141 IC 135
(Discontinued) |
.35-.45 |
.40-.70 |
.20-.80 |
1.40-1.80 |
|
.30-.45 |
|
|
|
Bal. |
Al, .85-1.20 |
2765-2805 |
|
N-155 AMS 5376 E
ASTM A-567 GR 3 (Discontinued-1987)
|
.20 |
1.00-2.00 |
1.00 |
20.00-22.50 |
19.00-21.00 |
2.50-3.50 |
.04 |
.03 |
|
Bal. |
Co,18.5-21.00;
W,
2.00-3.00;
Cb/Ta,
.75-1.25;
N2,
.10-.20 |
2325-2475 |
ht r |
|
    
Copyright © 1999, 2004 The C-M Group.
Specialty Material and Alloys Group. All rights reserved. Information in
this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders. |
|
 |
